electric oil pump

12L/min 12V 24V DC Electric Submersible Pump Diesel Fuel Water Oil Car Camping Fishing Submersible Aluminum Alloy Transfer Pump

Specification:

12V 1.8A   24V 0.8A

Voltage :12V/24V(DC) Electric current:2A

Wire length :3m

Flow rate: 12L/min Head: 2-3m

Outlet diameter: 16Mm Speed: 8500r/min

Silver material: stainless steel Gold section material: aluminum alloy

Application: diesel, water, kerosene

Description:

12V/24V portable submersible diesel oil pump has stable performance.Fully sealed device, insulation status.This product is small in size.Light weight, easy to install and carry.The wire is 3 meters long, the pump mouth diameter is 16 mm, and the pipe is self-supplied.

This product is widely used in refueling of automobiles, construction machinery, construction machinery, generators and agricultural machinery. It can also be used for changing water in fish tanks

1. The pump adopts DC12V 24V DC motor with low noise and fast speed.

2. The pump has good sealing performance and adopts multi-channel sealing to ensure no leakage and prolong service life.

3. The pump adopts stainless steel shell, increasing the thickness of the shell, making the shell more solid, not easy to deformation, but also can prevent the shell rust, rot and turbidity.

4. The bottom filter of the oil pump is equipped with stainless steel filter net to make the diesel oil (or water) more clean.The bottom filter is equipped with threaded interface for easy disassembly, maintenance and replacement.Can achieve the purpose of reuse.

5.There is a midway switch on the power line of the pump for easy operation.

6. The oil output of the oil pump is 12L/min.

7. The pump should be taken out of the oil (or water) in time after it is well used.

8. When pumping oil, the pump should first connect the self-provided oil hose, and then put the pump into clean oil (or water) as a whole.

9. Provide your own oil outlet hose.

Note:

1.The pump is strictly prohibited from pumping gasoline, alcohol and other flammable substances!Can not empty load operation and dry pumping.

2.38 The required current of the pump is ≥ 2A. If the current is less than this value, the product will not work normally, which is not a product quality problem

3. Confirm whether the voltage of the power supply is consistent with the voltage marked on the oil pump.

4.The voltage tolerance is ±5%, and pay attention to the positive and negative poles.

Withstand temperature: 50℃ or less at normal temperature

12V Car Electric Oil Extractor Transfer Pump 60W Mini Fuel Engine Oil/Crude Oil Fluid Suction Pump with Tubes For Auto Boat Mot

Feature:

[APPLICATION]: Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial/ medical/ chemical equipment, water purification &treatment equipment, vehicle cleaning, agricultural spraying, etc.

[VERSATILE] Fuel Pump is suitable for pump engine oil, crude oil, heating oil and other non-corrosive liquids.

[COMPACT &PORTABLE]: With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump.

[OPERATION]: The Oil Suction Gun can make oil simply drawing out the motor through the oil dipstick bore. Fluid Pump works by connecting the clamps to the car battery.

This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.

It works great for pumping engine oil, crude oil and heating oil.

About the installation, you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.

This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.

Specifications:

Pump Dimensions: 18 x 13 x 8.5cm

Inner Material: Copper motor

Outside Material: Plastic + Aluminium

Input Voltage: DC 12V

Wattage: 60W

Current: 5A

Work Sound: 70 dB

Maximum Flow Rate: 1.5 L/min,

Maximum Delivery Height: 2.3 ft.

Package Included:

1 x Fuel Transfer Pump

1 x Outlet Hose

1 x Inlet Hose

2 x Hose Clips

2 x Battery Clips

Pumping Speed:

Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min

Crude Oil Flow Rate: approx. 250L / Hour

Inlet Hose Length: approx. 155cm/61inch

Inlet Hose Outer Diameter: 6mm/0.236 inch

Inlet Hose Inner Diameter: 4mm/0.157 inch

Outlet Hose Length: approx. 124.5cm/49 inch

Outlet Hose Outer diameter: 12mm/0.472 inch

Outlet Hose Inner Diameter: 10mm/0.39 inch

Line Length: approx. 71cm/28 inch

Note: This product cannot be used to pump very viscous oils.

 

 

Durable 2000 times used --thick copper motor

 

 

 

Red is"+",Black is "-"

 

 

 

 

 

How to use?

 

 

 

 

 

 

 

 

 

We accept the dropshipping / wholesale / customization. 1. enough stock ,  factory Outlet . 2.  Priority delivery , order processing within 48 hours . 3. fast Logistics 15-25days . 4. USA/CA /RU / ES / CZ /FR /PL have local warehouse . Faster delivery ! 5. NOT include a receipt or an invoice. 6. If you need customization any LOGO or Other, please leave a message to us. ( above 50PCS ) Any questions, please feel free to contact us. Reply within 24 hours

 

 

 

 

 

 

 

 

 

 

 

Liquid Oil Transfer Pump Water Pump Powered Electric Outdoor Car Vehicle Fuel Gas Transfer Suction Pumps Liquid Transfer Oil

Features:
Move liquids safely and easily with this convenient handheld pump.
Pumps water, and other non-corrosive liquids.
Use in garage, aquariums, home and yard.
Each set comes with a circle ring. Increase firmness on the hose.
The material is environment-friendly Plastic tube.

Specification:
Type: Liquid Pump
Material: Plastic
Motor Power:3w
Current:1.5A
Voltage:3V
Gram:206.3g
Size:58CM
Material: Plastic
Quantity: 1pc
Item Color: As shown

Battery Operated Transfer Pump , Suitable for Kerosene,PetrolDiesel and water. 
1.When in use, please align the No. 1 battery with the power cord in the pump to ensure that it is powered on.
2.lmmerse the suction end of the pump in to the liquid to betransferred 
3.insert the discharge hose in the vessel you wish to fill. 
4.Push button and hold to fill be careful to turn off before over-filling. 

CAUTION CAUTION 
1.Do no run dry. Only switch on after submerging the bottom of the pump into fluid being pumped. 
2. Do not use with,thinner or solvents. 
3. Before pumping flammable liquidsextinguish heater and allow to cool.
4.Do not turn up side down after use. 
5.Remove batteries when not in use for long periods of time 

Package:
1* Liquid Pump(not included battery)
 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oil Diesel Extractor Pump 12V Electric Scavenge Suction Transfer Change Pump with Tubes Motor 100W 4L for Car Boat Motorcycle

Product name: Oil Transfer Pump
Material: metal
Voltage: 12v
Power: 100W
 Flow: 4L/min

We test Cold motor oil is about 2-3L per minute.

No-loading Current: 2.5A
Loading Current: 5A
Work cycle: 30min
Theory: Gear pump
Pump Diameter: Approx. 16x6.2cm
Inlet tube (approx.): 0.8x100cm (D x L)；0.6x100cm (D x L)

Outlet tube (approx.): 1x100cm (D x L)

Remind: Before sending the pump, we will use the hydraulic oil to test pump,thus the pump you received will with the hydraulic oil.

VEVOR 750W Electric Driven Hydraulic Pump Single/Double Acting Solenoid/Manual Valve Hydraulic Oil Station High Pressure Pump

Product Description

Electric Hydraulic Pump

This single/double acting solenoid valve hydraulic pump unit is a hydraulic component that supplies pressurized liquid to a hydraulic transmission. Its function is to convert the mechanical energy of a power machine (such as an electric motor and an internal combustion engine) into the pressure energy of a liquid.

And the single/double acting manual valve hydraulic pump unit is composed of single-phase asynchronous motor, high-pressure oil pump, and fuel tank. It has the advantages of small size, high pressure, lightweight, simple structure and easy to use. This pump reduces manual work and maximizes work efficiency. The oil pump's regular working temperature is between 10~50.

• Efficient Motor

• Large Capacity Tank

• Premium SUS 304 & Accessories

• Accurate Pressure Gauge

• Effective Oil Volume

Tough Equipment & Tools, Pay Less

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated
employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly
low prices. Today, VEVOR's products are sold in more than 200 countries and regions with 10 million
plus members worldwide.

Why Choose VEVOR?

• Premium Tough Quality

• Incredibly Low Prices

• Fast & Secure Delivery

• 30-Day Free Returns

• 24/7 Attentive Service

Notice:
Check the voltage of the unit before using the electric hydraulic pump, and check that the plug is not connected to the socket. Connect one end of the high pressure tubing to the connector of the unit and the other end to the type of tool you need. Also, please note that the quick couplings at both ends are locked in place. The quick coupling must be forced to the bottom and screwed into the jacket nut without loosening.

Key Features

High-power Motor

This electric hydraulic pump uses 750W power pure copper motor with aluminum shell, saving power and effort, freeing your hands. 1400 revolutions per minute, fast speed and high work efficiency.

Large Fuel Tank

This electric hydraulic pump tank can store 7L/8L of oil, 15 - 46 hydraulic oil. Large capacity extends working hours. Observe the hydraulic cylinder at any time through a visible window to inlet the oil in time.

Pressure Gauge

A precise pressure gauge is accurate. It is a 10000 psi hydraulic pump which is higher than most products at the market. High pressure is for driving piston and low pressure is for piston reset.

Solenoid Valve/Manual Valve

Solenoid Valve: Turn on the power. Then, control the input and output of the hydraulic oil by operating the pedal solenoid valve, electric hydraulic valve. Foot switch for hands-free remote control.
Manual Valve: Operate the electric hydraulic valve manually to control the input and output of the oil. The valve up, giving pressure; The valve down, relieving pressure. Sensitive on/off switch.

Single Acting/Double Acting

The single-acting design is convenient and quick. High-pressure oil pipe is high-quality and durable. Dust caps protect the oil pipe from dirt.
The double-acting design is more convenient and quick, more applicable. High-pressure oil pipe is high-quality and durable with dust caps to protect the oil pipe from dirt.

Wide Application

If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly.

Electric Hydraulic Pump Single Acting Solenoid Valve

• Function: Single-acting, solenoid valve

• Voltage: 110V(US)/220V(EU)±15%, 60/50Hz

• Power: 750W

• Voltage pressure: 7 to 70 Mpa

• High-voltage flow: 0.9 L/min

• Low-voltage flow: 5 L/min

• Rotating speed: 1400 r/min

• Oil storing quantity: 7L (1.82 Gallon)

• Oil breed: 15# - 46# anti-wear hydraulic oil

• PSI: 10000psi

Package Content

• 1 X Hydraulic Pump

• 1 x1 X Oil Hose

• 1 x Product Manual

Electric Driven Hydraulic Pump Double Acting Solenoid Valve

• Function: Double-acting, solenoid valve

• Voltage: 110V(US)/220V(EU)±15%, 60/50Hz

• Power: 750W

• Hydraulic Pressure: 7 to 70 Mpa

• High-voltage flow: 0.9 L/min

• Low-voltage flow: 5 L/min

• Rotating speed: 1400 r/min

• Oil storing quantity: 7L (1.82 Gallon)

• Oil breed: 15# - 46# anti-wear hydraulic oil

• Low Pressure Stage: 290 PSI

• High Pressure Stage: 10000 PSI

• Connector Type: 3/8" NPT with dust cap

The US Plug have Pressure retaining valve, EU Plug no Pressure retaining valve. Please make sure not mind before you bid.

Package Content

• 1 X Hydraulic Pump

• 1 x1 X Oil Hose

• 1 x Product Manual

Electric Hydraulic Pump 10000PSI Single Acting Manual Valve

• Model: ZCB-63A

• Control: Push Button Stop / Start, Lever Valve Action

• Voltage: 110V(US)/220V(EU)±15%, 60/50Hz

• Power: 750W(1HP)

• Oil Capacity: 7 L

• Low Pressure Stage PSI: 290

• High Pressure Stage PSI: 10,000

• Low Pressure Stage Flow Rate: 1.3 Gallons per minute

• High Pressure Stage Flow Rate: 0.18 Gallons per minute

• Thread: 3/8" NPT

• Rated Pressure: 10,000 psi

Package Content

• 1 X Electric Hydraulic Pump

Electric Hydraulic Pump 10000 PSI Double Acting Manual Valve

• Model: ZCB-65C

• Voltage: 110V(US)/220V(EU)±15%, 60/50Hz

• Function: Double-acting, manual valve

• Working pressure: 290PSI - 10152PSI(2Mpa-70Mpa)

• Flow rate: 0.9L/min - 5L/min

• Oil capacity: 8L

• Motor power: 0.75KW

• Motor speed: 1400r/Min

• Machine size: 7.87"x12.6"x17"

• Weight: 57lbs

Package Content

• 1 X Electric Driven Hydraulic Pump

• 2 X Oil Hoses

Features & Details

• 【EFFICIENT MOTOR】- Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa/7Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min.

• 【LARGE CAPACITY TANK】- With a large fuel tank capacity, 7L/8L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use.

• 【ACCURATE PRESSURE GAUGE】- This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa/7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need.

• 【EFFECTIVE OIL VOLUME】- Solenoid Valve: Manage this single/double-acting hydraulic gear pump by a solenoid valve. The high-pressure oil pipe is of high quality and durability.Manual Valve: Manage this single/double acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability.

• 【VARIOUS APPLICATION】- The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly, and disassembly. Reduce manual work and maximize work efficiency.

Portable Electric Drill Pump Diesel Oil Fluid Water Pump Mini Hand Self-priming Liquid Transfer Pumps Home Garden Outdoor tool

Household Portable Electric Drill Pump Diesel Oil Fluid Water Pump Mini Hand Self-priming Liquid Transfer Pumps

Household Portable Electric Drill Pump Diesel Oil Fluid Water Pump Mini Hand Self-priming Liquid Transfer Pumps Feature: 1. Exquisite workmanship, small size, light weight, easy installation and simple use,no battery required. 2. Large flow, 1800m/h, stable performance and high efficiency. 3. Install all drill chucks to get a pump with electric drill. 4. Exquisite workmanship, corrosion resistance and wear resistance. 5. Compact design, easy to carry and store. 6. Very suitable for transporting light liquids such as fresh water, sea water, oil, dilute organic solvents, pesticides and liquid fertilizers. 7.Pump, need to be used with electric drill Specification: Material: plastic shell Size: 126*63mm/4.96*2.48" Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-3mm measuring deviation due to manual measurement.   1 X  Water Pump

CE Electric coolant pump oil mist BPV sprayer metalworking cooling CNC engraving router cooler 2L 1 hose timer COMPACT

...

Complete flood coolant pump unit
	Compact	Timer / PLC control	Gear	Needle
BPV	2L1P / 2L2P / 4L2P / 4L1PE	2L1P / 4L1P / 4L2P	2L1P / 4L1P	100C1P
HETUO
CS	2L1P	2L1P / 4L1P

...

Advanced Coolant hose kit
	BPV	HETUO	CS
no magnetic base	no hose / 30cm / 30cm metal / 30cm copper / 50cm copper / 2m	225mm / 600mm	no hose
with magnetic base	no hose / 30cm copper / 50cm copper / 2m

...

BASIC Coolant hose kit
without magnetic base	1/8" NPT	2/8" NPT	3/8" NPT	4/8" NPT
with magnetic base	1/8" NPT	2/8" NPT	3/8" NPT	4/8" NPT

...

...

Portable Mini 12V 24V DC Electric Submersible Pump For Pumping Diesel Oil Water Aluminum Alloy Shell 12L/min Fuel Transfer Pump

Product parameters:

12v 1.8A   24V  0.8A

Flow:12L/Min

the outer diameter 38MM

Outlet: 16MM

Wire: 3M

Motor Racing Speed:8500r.p.m

the oil outlet hose is self-provided

NOTE:

1 when the diesel oil pump work, first of all, the clean diesel pump should be put in the diesel oil drum, not allowing no load operation.

2 pumps for corrosion protection, can not be used to transport chemicals liquid. Strictly prohibit the transfer of gasoline, alcohol and other flammable liquids.

3 pumps for diesel, kerosene, water. Prohibited transportation of gasoline, alcohol and other flammable liquids.

4 correctly connect the positive and negative poles of the power supply. Must be fully immersed in the bottom of the pump in the use of liquid. Continuous working time is not more than 30 minutes

12V Electric Car Oil Pump Crude Oil Fluid Pump 60W Extractor Transfer Engine Suction Pump + Tubes for Auto Car Boat Motorcycle

Feature:

[APPLICATION]: Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial/ medical/ chemical equipment, water purification &treatment equipment, vehicle cleaning, agricultural spraying, etc.

 

[VERSATILE] The fuel pump is suitable for pumping oil and diesel.

 

[COMPACT &PORTABLE]: With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump.

 

[OPERATION]: The Oil Suction Gun can make oil simply drawing out the motor through the oil dipstick bore. Fluid Pump works by connecting the clamps to the car battery.

 

This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.

It works great for pumping engine oil, crude oil and heating oil.

About the installation, you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.

This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.

 

Specifications:

Pump Dimensions: 18 x 13 x 8.5cm

Inner Material: Copper motor

Outside Material: Plastic + Aluminium

Input Voltage: DC 12V

Wattage: 60W

Current: 5A

Work Sound: 70 dB

Maximum Flow Rate: 1.5 L/min,

Maximum Delivery Height: 2.3 ft.

 

Package Included:

1 x Fuel Transfer Pump

1 x Outlet Hose

1 x Inlet Hose

2 x Hose Clips

2 x Battery Clips

 

Pumping Speed:

Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min

Crude Oil Flow Rate: approx. 250L / Hour

Inlet Hose Length: approx. 155cm/61inch

Inlet Hose Outer Diameter: 6mm/0.236 inch

Inlet Hose Inner Diameter: 4mm/0.157 inch

Outlet Hose Length: approx. 124.5cm/49 inch

Outlet Hose Outer diameter: 12mm/0.472 inch

Outlet Hose Inner Diameter: 10mm/0.39 inch

Line Length: approx. 71cm/28 inch

 

Durable 2000 times used --thick copper motor

Red is"+",Black is "-"

How to use?